southsales.thegreenbox@rockwell.co.in +919392180076

Cold Room Consultation & Design in Tamil Nadu —
Free Site Visit, Refrigeration Load Calculation, and Itemised Quote in 48 Hours

The Right Cold Room Design Starts With the Right Site Assessment. Our Engineer Visits Your Facility Across Tamil Nadu — Free, Within 48 Hours, With No Obligation.

Get Instant Quote
500+ InstallationsSouth India Wide
Free Site VisitWithin 48 Hours
1-Year WarrantyAll Components
7–10 Day InstallTamil Nadu Wide

Our cold room consultation service is built around eliminating design errors before they become installation decisions. When our engineer visits your facility, he does not take a few measurements and pull a stock configuration from a catalogue. He conducts a refrigeration load calculation specific to your room volume, your product type, your target temperature, your door cycle frequency, and the ambient conditions of your specific building in Tamil Nadu. He reviews your compliance requirement — FSSAI for food processing, WHO-GDP for pharmaceutical, MPEDA for seafood export — and designs the cold room to meet those standards from the ground up, not adapted after the fact. He considers your power supply, your drainage, your access requirements, and your budget constraints. The result is a cold room designed for your specific situation — not a generic configuration sold to the last 50 customers.

The consultation and quotation are completely free — no site visit charge, no consultation fee, no deposit to receive a quote. We visit anywhere in Tamil Nadu within 48 hours of your enquiry and deliver your detailed itemised quotation within 24 hours of the site visit. The quotation breaks down every component — panel specification and thickness, compressor model and capacity, evaporator type, door specification, insulated floor specification if required, electrical work, and installation cost. Nothing is bundled into a single lump sum that hides the detail. You know exactly what you are buying, at what specification, before you spend a rupee.

Cold Room Consultation & Design Tamil Nadu
Cold Room Consultation & Design Tamil Nadu
Cold Room Consultation & Design Tamil Nadu
Cold Room Consultation & Design Tamil Nadu

Getting the design of a cold room right before installation begins is the single most important factor in whether that cold room performs reliably for the next 15 to 20 years — or becomes an expensive problem within 2 to 3. Most cold room failures in Tamil Nadu trace back to a design error: an undersized compressor that cannot hold target temperature in a 45°C May afternoon, PUF panels too thin for the required temperature differential, an evaporator unit placed against the wrong wall creating hot spots and cold spots in the same room, or a blast freezer sized for the average batch weight rather than the peak batch weight. These are not installation errors. They are design errors — and once the room is built, they are expensive to fix.

What Our Free Cold Room Consultation Includes

Site Survey & Measurement

Full dimensional measurement of proposed cold room space. Assessment of ceiling height, floor condition, wall structure, existing drainage, electrical supply location and capacity, and access constraints.

Refrigeration Load Calculation

Precise calculation of required TR (tonnes of refrigeration) based on your room volume, target temperature, ambient temperature, product load, door cycle frequency, and internal heat sources.

Compressor & Refrigeration System

Recommended compressor brand, model, and capacity. Condenser type (air-cooled or remote). Tropical rating verification for Tamil Nadu 45°C+ summer conditions.

Door Specification

Door type (hinged, sliding), size, insulation thickness, cam-lift hinge rating (standard or high-cycle), magnetic door seal specification, and anti-condensation frame heater requirement.

Compliance Design

Industry-specific compliance requirements mapped into the cold room design — FSSAI Schedule 4, WHO-GDP, MPEDA, HACCP, or retail buyer specifications as applicable.

Layout Drawing

Dimensioned layout sketch (CAD drawing for complex projects) showing panel configuration, door position, evaporator location, drainage routing, and electrical entry point.

Itemised Quotation

Full cost breakdown for every component — panels, refrigeration, door, electrical, installation, and commissioning. Delivered within 24 hours of site visit. Valid for 30 days.

Frequently Asked Questions

Our engineer visits your facility within 48 hours of your enquiry. During the visit, he assesses your available space, measures the room dimensions, evaluates your product type and temperature requirement, checks your power supply capacity, and reviews compliance or regulatory specifications if relevant (FSSAI, GDP, MPEDA). Within 24 hours of the site visit, you receive a detailed itemised quotation covering PUF panel specification, refrigeration capacity in TR, compressor model, door specification, electrical work, and installation cost. The consultation and quotation are free with no obligation.

Refrigeration load calculation accounts for: the room volume (cubic metres), the target temperature and ambient temperature differential, the thermal conductivity of the PUF panel thickness specified, the heat load from product entering at ambient or processing temperature, the heat load from lighting, people, and motors inside the room, and the door open time per shift. We conduct this calculation for every cold room we design — not a rule-of-thumb estimate. An undersized refrigeration system is one of the most common reasons cold rooms fail to hold temperature in Tamil Nadu's summer conditions.

Yes — completely free. No consultation fee, no site visit charge, no quotation fee. We visit your facility anywhere in Tamil Nadu, conduct the full technical assessment, and deliver a detailed itemised quotation within 24 hours of the visit. If you proceed with us, the consultation is folded into the project. If you choose another supplier, you keep the quotation. We believe the quality of our site assessment and quotation is itself a demonstration of our capability — and most clients who experience it choose to proceed.

For standard cold rooms — walk-in cold rooms, chiller rooms, blast freezer rooms — the design is completed during the site visit and quotation process. You receive your quotation within 24 hours of the site visit, which includes the complete design specification. For complex multi-chamber cold storage or large projects requiring civil integration, we provide a detailed design document including layout drawings, refrigeration schematics, and panel configuration within 3 to 5 working days of the site visit.

PUF panel thickness is determined by the target temperature and the ambient temperature differential. For chiller rooms at 0°C to +8°C: 80mm panels. For blast freezer rooms and freezer rooms at −18°C to −25°C: 100mm to 120mm panels. For deep freeze rooms at −30°C to −40°C: 150mm panels. In Tamil Nadu's high ambient temperature conditions, we typically specify one panel thickness grade higher than the European standard to compensate for 43°C to 45°C summer ambient temperatures.

Yes. For standard cold rooms, we provide a dimensioned layout sketch with panel configuration, door position, and evaporator location as part of the quotation package. For large or complex projects, we provide CAD layout drawings showing integration with existing civil structure, drainage plan, electrical routing, and refrigeration pipework layout. Layout drawings are provided before installation begins — you know exactly what you are getting before you approve the order.

Yes. If your existing cold room is not maintaining target temperature, consuming excessive electricity, or failing inspection requirements, our engineer assesses the root cause during a site visit. Common issues include undersized compressor for Tamil Nadu summer conditions, inadequate panel thickness, door seal failure causing infiltration, or incorrect evaporator placement creating hot spots. We provide a remediation plan — which may be a component upgrade, a full interior retrofit, or in some cases a recommendation to replace the room entirely if the structure is beyond economic repair.

Yes. Compliance-specific cold room design is a core part of our consultation service. For FSSAI food processing cold rooms, we design to Schedule 4 hygiene and temperature standards. For GDP pharmaceutical cold rooms, we design for WHO-TRS 957 requirements including panel specification, multi-point sensor positioning, and IQ/OQ documentation readiness. For MPEDA seafood export cold rooms, we design blast freezers with documented pull-down capability and corrosion-resistant construction. Our engineer understands the regulatory requirements and designs the cold room to meet them from the start — not retrofitted after installation.

Having this information ready makes the site visit faster and the quotation more accurate: approximate room dimensions (length × width × height in feet), target storage temperature (or the product you want to store), the quantity of product you plan to store (in kg or tonnes), your power supply (single phase or three phase, connected load available), your preferred door position (which wall), and any compliance standard you need to meet (FSSAI, GDP, MPEDA, or specific retail buyer requirements). If you do not have all of this, do not worry — our engineer will ask the right questions and help you identify the answers.

We conduct free site visits and cold room consultations across all Tamil Nadu districts — Coimbatore, Chennai, Madurai, Salem, Trichy, Tiruppur, Erode, Dindigul, Tirunelveli, Hosur, Karur, Namakkal, Vellore, Thoothukudi, Nagapattinam, Thanjavur, Ariyalur, Perambalur, Pudukottai, and all other locations. Call +91 9392180074 to schedule your free site visit.

Request Quote

Please enter your company name.
Please provide a valid telephone line.
Please input a valid company email.
Please specify a target contact point.
Specify required volume blocks.
Select a valid delivery path window.
Please add basic blueprint details.